Industry Directory | Manufacturer / Other
TTi makes standard and custom thermal platforms, Hybrid Benchtop Temperature Chambers which combine the benefits of a small benchtop chamber with a separately controlled thermal platform for speed, uniformity versatility.
Industry Directory | Consultant / Service Provider / Manufacturer / Manufacturer's Representative / Other
Semiconductor and SMT equipments sales new and used. Includes FA lab equipment Test, FIB, SEM, EDX,, C-SAM, inspection and probers
New Equipment | Cleaning Equipment
The first technology to use centrifugal energy to clean electronic circuit assemblies, precision parts, and semiconductor packages. The system offers unparalleled penetration, solubilization, and contaminant removal The MicroCel Centrifugal Cleanin
Environmental testing is a very useful tool in ensuring product reliability. We have an environmental laboratory that can assist with every aspect of this testing. Our capabilities begin with test planning with the customer and proceed to execution
Electronics Forum | Sat Sep 09 08:21:36 EDT 2000 | Sal
guys Currently experienced this problem on a product which had been running satifactorily for a period of time. No process changes were made, The problem was highlighted when after ICT when the boards were loaded in to the stress chamber, after the
Electronics Forum | Tue Mar 09 11:10:31 EST 2010 | baildl632
Graceyt, I know you are being shot a lot of info. Have you gotten any resolution to this problem? I've seen similar problems in our thermal chamber with Demodulation units. The IC, in the module, inside the radio inside the chamber at the top of ou
Used SMT Equipment | Board Cleaners
Aqueous Technologies PC Board Cleaner For Sale Model Number: AQ400/CL Serial Number: 5198 Type: Closed Loop - Includes Tanks Programmable Machine Parameters: Pre-Wash - Wash - Chemical Injection - Rinse - H20 Temp - Resistivity Meter- Data -
Used SMT Equipment | Board Cleaners
Very nice Aqueous Technologies PC Board Batch Cleaner For Sale! See attached pictures and information below. Equipment Description Aqueous Technologies Model Number: AQ-400 Serial Number: 6291 Year: 8/5/97 Fully Automatic cleaning and dryin
Industry News | 2019-05-08 00:26:12.0
Temperature cycling machine,we also call it thermal shock chamber,it's widely applied in semiconductor manufacturing industry.
Industry News | 2020-11-19 20:55:18.0
Temperature cycling test or thermal cycle testing is done on substances to determine the immunity of vulnerability to alternating extremes of low and high temperatures. You can utilize temperature cycling test chambers to test nearly all commercial goods to determine how they withstand extreme temperature changes. The intent of analyzing a product under these conditions is to detect changes in the goods' characteristics and assess the failure incidence of distinct substances and thermal expansion coefficients.
.jpg)
Parts & Supplies | Soldering - Reflow
This reflow oven is top quality oven represent the world's best low cost, high performance solder reflow sytem. The sensor is designed in the front of tip and the temperature induction is very exact and sensitive, the speed of heating and recovery of
Technical Library | 2007-01-31 15:17:04.0
The goal of this project is to evaluate the reliability of lead-free BGA solder joints with a variety of different pad sizes using several different BGA rework methods. These methods included BGAs reworked with both flux only and solder paste attachment techniques and with or without the use of the BEST stay in place StencilQuick™. The daisy chained test boards were placed into a thermal test chamber and cycled between -25ºC to 125ºC over a 30 minute cycle with a 30 minute dwell on each end of the cycle. Each BGA on the board was wired and the continuity assessed during the 1000 cycles the test samples were in the chamber.
Technical Library | 2019-11-17 22:46:45.0
Overview of walk-in temperature and humidity chamber: It also belongs to environmental test equipment, it tests whether the product can resist high temperature, low temperature, humidity, or the physical and chemical changes produced under extreme conditions, the walk-in temperature and humidity chamber volume is large, the product is placed, or a large object can be placed, such as automobile, new energy, television and liquid crystal screen, etc. How to do the routine maintenance of the walk-in temperature and humidity chamber: 1. The wet gauze basically, if there is no special case, s/b usually changed once in 3 months 2. The water channel shall be regularly cleaned, including water cup, water tank, etc., so as to prevent the water from being blocked,affect the humidity test. 3. It is forbidden to test the flammable and explosive products inside working room. 4. Clean the chamber on a regular basis 2. How to operate walk-in temperature and humidity chamber: The operation method is same as standard temperature humidity test chamber,the controller is 7-inch LCD programmable color screen, you only need to setthe temperature point---test time--how many cycles need to be tested, This can be done automatically, and the machine will stop automatically when it is complete. If there is any problem during the operation, the corresponding problem point will be displayed on the machine control screen. Walk-in temperature and humidity chamber is a must equipment for reliability test of Automobile,Aerospace,Electronic parts,etc,the operation and maintenance are easy,it is teh tear down mahcine,Climatest engineers will be dispatched to do on-site support,for instance,we will finish commissioning,train customers how to operate,maintain,welcome to follow our company facebook page:https://www.facebook.com/Climatechambers
The first technology to use centrifugal energy to clean electronic circuit assemblies, precision parts, and semiconductor packages. The system offers unparalleled penetration, solubilization, and contaminant removal The MicroCel Centrifugal Cleanin
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Career Center | kerala, any ware India | Production
i have experience in • Operation of wave soldering and water cleaning machine • Inspection ( Reflow and Post Wave ) • Pre Reflow inspection in SMD • Component forming stuffi
Career Center | Los Gatos, California | Management,Sales/Marketing
Seasoned sales professional skilled in both direct sales and sales management. Recognized for polished communication, negotiation, and problem-solving skills, Excelled in positions where a combination of direct sales and channel sales force developm
